最新352-001考试题库
Examsoon最新352-001认证真题,真题覆盖率达到90%以上。考不过全额退款保障,让您认证无忧。绝对真实来自Examsoon的高质量题库。
购买352-001考试题库请认准Examsoon标志!切勿因贪便宜而造成不必要的损失和遗憾。下载题库及任何352-001问题请与我站管理员联系!
352-001 考试是 Cisco 公司的 ADVDESIGN 认证考试官方代号,Examsoon的352-001权威考试题库软件是Cisco认证厂商的授权产品,Examsoon绝对保证第一次参加 352-001 考试的考生即可顺利通过,否则承诺全额退款!
选择 Examsoon 352-001 题库
352-001题库购买时请一定要认准Examsoon标志,世界第一IT认证资料服务提供商中国服务中心。
Examsoon
部分最新免费352-001认证题库:(您也可以联系我下载部分最新352-001考试题库)
Exam : Cisco 352-001
Title : ADVDESIGN
1. What information can you get from TCP flags while assessing an attack?
A. source of the attack
B. type of attack
C. target of the attack
D. priority of the attack traffic
Answer: B
2. Which two reasons are correct about building a flooding domain boundary in a link-state network? (Choose two.)
A. to increase the size of the Shortest Path First tree
B. to aggregate reachability information
C. to provide an administrative boundary between portions of the network
D. to segregate complex and rapidly changing portions of the network from one another
Answer: BD
3. Lafeyette Productions is looking for a new ISP that has improved availability, load balancing, and catastrophe protection. Which type of ISP connectivity solution would be best?
A. single run
B. multi-homed
C. stub domain EBGP
D. direct BGP peering
Answer: B
4. You are the Cisco Network Designer in certways.com. Which two characteristics are most typical of a SAN? (Choose two.)
A. NICs are used for network connectivity.
B. Servers request specific blocks of data.
C. Storage devices are directly connected to servers.
D. A fabric is used as the hardware for connecting servers to storage devices.
Answer: BD
5. In the network presented in the following exhibit, all routers are configured to perform EIGRP on all interfaces. All interface bandwidths are set to 1000, and the delays are configured as displayed. In the topology table at Router TIS-RC, you see only one path towards 1.1.0/24.
Why Router TIS-RC only has one path in its topology table?
A. Router TIS-RB is not advertising 10.1.1.0/24 to Router TIS-RC due to split horizon.
B. Router TIS-RD is not advertising 10.1.1.0/24 to Router TIS-RC because Router TIS-RC is its feasible successor.
C. Router TIS-RD is not advertising 10.1.1.0/24 to Router TIS-RC due to split horizon.
D. Router TIS-RB is not advertising 10.1.1.0/24 to Router TIS-RC because Router TIS-RC is its feasible successor.
Answer: C
6. Connecting an IS-IS router to four links and redistributing 75 routes from RIP.
How many LSPs will be originated by this router?
A. one LSP: containing the router information, internal routes, and external routes
B. six LSPs: one for each link, one containing router information, and one containing external routing information
C. two LSPs: one containing router information and internal routes and one containing external routes
D. three LSPs: one containing all links, one containing router information, and one containing external routing information
Answer: A
7. According to the network in this exhibit, traffic directed towards 10.1.5.1 arrives at TIS-R4. Which path will the traffic take from here?
A. It will take TIS-R2.
B. It will not take any path. TIS-R4 will drop the traffic.
C. It will take TIS-R3.
D. It will load share between TIS-R2 and TIS-R3.
Answer: A
8. In the network presented in the following exhibit, all routers are configured to run EIGRP on all links. All packets transmitted during convergence are transmitted once (there are no dropped or retransmitted packets).
What is the maximum number of queries TIS-R3 might receive for 192.168.1.0/24 if the link between TIS-R1 and TIS-R2 fails?
A. four queries, one each from TIS-R2, TIS-R4, TIS-R5, and TIS-R6
B. no queries, because there aren’t any alternate paths for 192.168.1.0/24
C. seven queries, one from TIS-R2 and two each from TIS-R4, TIS-R5, and TIS-R6
D. one query, since the remote routers TIS-R4, TIS-R5, and TIS-R6 are natural stubs in EIGRP
Answer: A
9. What is the way that an OSPF ABR uses to prevent summary route information from being readvertised from an area into the network core (Area 0)?
A. It advertises only inter-area summaries to the backbone.
B. It uses poison reverse and split horizon.
C. It only sends locally originated summaries to the backbone.
D. It compares the area number on the summary LSA to the local area.
Answer: C
10. All routers in this network are running EIGRP according to the exhibit.
Which step is the most important to make sure that this network core will converge quickly should a link failure occur?
A. make certain the maximum number of paths on both of the routers is two
B. make certain EIGRP is not running across non-transit links
C. add another link between the two routers with no servers and set the metric on this new link equal to the other four links
D. make certain EIGRP is running across all links
Answer: B
11. You work as a network technician for the TIS Ltd. Study the exhibit carefully, router TIS-RA is the hub router in a Frame Relay hub-and-spoke deployment. Configure router TIS-RA’s serial interface as a point-to-multipoint interface, and it is servicing three spoke routers. The link between Router TIS-RC and the frame provider experiences a service disruption, which causes the interface on Router TIS-RC to go down.
How does Router TIS-RA learn of this failure in the network and how does it react?
A. If OAM is configured between Router TIS-RA and Router TIS-RC, router TIS-RA will be notified of the failure after three missed OAM packets. After the third OAM packet is missed, the frame PVC becomes inactive, and this event terminates the routing process neighbor relationship established between Router TIS-RA and Router TIS-RC.
B. Router TIS-RA does not detect the failure in the network and its interface continues to remain in an operational state.
If routing is configured over this link, Router TIS-RA must wait for the neighbor relationship to time-out before updating its routing table to account for the lost router and its networks.
C. Router TIS-RA must wait for a full LMI status update from the provider frame switch before it is notified about the PVC status.
Once the full LMI status message is received, the routing process neighbor relationship between Router TIS-RA and Router TIS-RC is immediately terminated.
D. Router TIS-RA immediately detects the failure via LMI notification and its interface is placed in a non-operational state.
If routing is configured over this link, the neighbor relationship is terminated and the routing table is updated. The change is then propagated as appropriate to the rest of the network.
Answer: B
12. The IGP next-hop reachability for a BGP route is lost but a default route is available.
Assuming that BGP connectivity is maintained, what will happen to the BGP route?
A. It will be put in a hold-down state by BGP until the next hop has been updated.
B. It will be removed from the BGP table.
C. It will be considered a valid route.
D. It will be considered invalid for traffic forwarding.
Answer: C
13. How many broadcast segments are contained in this network according to the exhibit?
A. 1
B. 2
C. 4
D. 5
Answer: B
14. NetFlow provides valuable information about network users and applications, peak usage times, and traffic routing. Which function is of NetFlow?
A. monitor configuration changes
B. monitor CPU utilization
C. monitor link utilization
D. generate traps for failure conditions
Answer: C
15. Which two steps can be taken by the sinkhole technique? (Choose two.)
A. reverse the direction of an attack
B. redirect an attack away from its target
C. monitor attack noise, scans, and other activity
D. delay an attack from reaching its target
Answer: BC
16. When designing a converged network, which measures can be taken at the building access layer to help eliminate latency and ensure end-to-end quality of service can be maintained? (Choose three.)
A. rate limit voice traffic
B. onfigure spanning-tree for fast link convergence
C. isolate voice traffic on separate VLANs
D. classify and mark traffic close to the source
Answer: BCD
17. Which VPN management feature would be considered to ensure that the network had the least disruption of service when making topology changes?
A. dynamic reconfiguration
B. path MTU discovery
C. auto setup
D. remote management
Answer: A
18. The TIS company is planning to deploy a new multicast application in its network to do real-time trading. This application will be performed simultaneously by thousands of traders located throughout the network, each a source of several IP multicast streams, to carry the "sell" and "buy" trading bids. All routers in its network have full hardware support for all PIM multicast modes.
Which mode can be used to minimize the impact of the new application on the routers in the TIS network?
A. PIM Source Specific Multicast
B. PIM Any-Source Multicast
C. PIM Dense Mode
D. PIM Bidirectional
Answer: D
19. The TIS company is deploying OSPF on a point-to-multipoint Frame Relay network. The remote sites needn??t to communicate with each other and there are a relatively small number of sites (scaling is not a concern).
How to configure OSPF for this topology in order to minimize the additional routing information injected into the network and keep the configuration size and complexity to a minimum?
A. Configure the link as OSPF nonbroadcast and manually configure each of the remote sites as a neighbor.
B. Configure the link as OSPF broadcast and configure the hub router to always be the designated router.
C. Configure the link as OSPF broadcast and configure a mesh group towards the remote routers.
D. Configure the link at the hub router as OSPF point-to-multipoint and at the remote routers as OSPF point-to-point.
Answer: B
20. What is high availability?
A. redundant infrastructure
B. clustering of computer systems
C. reduced MTBF
D. continuous operation of computing systems
Answer: D
Examsoon
352-001学习资料
Examsoon
352-001题库,不同于Testiinside 352-001、certtinside 352-001、Pass4side352-001、Testking352-001、Pass4sure352-001的题库资料,是全球IT认证资料供应力量,以高科技的仿真效果,完全覆盖各类IT认证考试真题,保证您一次性得到最标准的认证真题测试。
Examsoon 352-001 的优势
1.Examsoon 模拟测试题具有最高的专业技术含量,只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权,我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon模拟测试,我们将保证你的第一次参加考试即取得成功,否则,我们将全额退款!
4.提供每种产品免费测试。在您决定购买之前,请检测联接,可能存在的问题及试题质量和适用性。
352-001 考试是 Cisco 公司的 ADVDESIGN 认证考试官方代号,Examsoon的 352-001 权威考试题库软件是 Cisco 认证厂商的授权产品,Examsoon 绝对保证第一次参加 352-001考试的考生即可顺利通过,否则承诺全额退款!
ADVDESIGN 认证作为全球IT领域专家 Cisco 热门认证之一,是许多大中IT企业选择人才标准的必备条件。 如果你正在准备 352-001 考试,为 Cisco ADVDESIGN认证做最后冲刺,又苦于没有绝对权威的考试真题模拟, Examsoon希望能助你成功。
1、Examsoon考题大师352-001试题都是考试原题的完美组合,覆盖率95%以上,答案由多位专业资深讲师原版破解得出,正确率100%,只要您使用本站的考试题库参加352-001 考试,我们保证您一次轻松通过考试;
2、售后服务第一!我们相信要想在当今时代取得成功,必须为广大用户提供全套的周到细致的全程优质售后服务,只有客户满意了,我们才能发展。客户至上是我们Examsoon考题大师的一贯宗旨;
3、Examsoon实行“一次不过全额退款”承诺。如果您购买我们352-001的考题,只要不是首次通过,凭盖有PROMETRIC或VUE考试中心钢印的考试成绩单,我们将退还您购买352-001考题大师的全部费用,绝对保证您的利益不受到任何的损失;
4、本站352-001题库根据352-001考试的变化动态更新,在厂家考题每次发生变化后,我们承诺2天内更新352-001题库。确保352-001考题的覆盖率始终都在95%以上;我们提供2种 352-001 考题大师版本供你选择。
5、软件版本352-001 考试题库
优点:具有学习模式,测试模式,线上自动升级
缺点:仅限固定电脑使用,不可打印为文本,只能PC阅读
6、PDF 格式352-001考试题库
优点:不需下载安装软件,方便用户打印和携带,但也带来了可随意制的弊端,因此我们提醒用户不得随意公开或出售本站的352-001题库,一经发现立即取消其升级资格,且不予退款。
缺点:不具备测试模式,通过查看Examsoon网站及查收我们的更新E-MAIL获取更新信息。